Main control multifunction pcb

Basic Info

Model No.: CW-234

Structure: Multilayer Rigid PCB

Dielectric: FR-4

Application: Consumer Electronics

Flame Retardant Properties: V0

Additional Info

Transportation: Ocean,Land,Air

Place of Origin:  China

Supply Ability: 10000sqm/month

Certificate: ISO9001, ISO14001, UL, IATF16949

Product Description

Main control multifunction printed circuit boards.

Bonding is a kind of wire bonding method in the chip production process. It is generally used to connect the internal circuit of the chip with gold wire or aluminum wire and packaged pin or circuit board gold-plated copper foil before the package. Ultrasonic from the ultrasonic generator (generally 40-140KHz), the high-frequency vibration is generated by the transducer, and transmitted to the boring tool through the horn. When the boring tool is in contact with the lead wire and the workpiece to be welded, the surface of the metal to be welded rubs against each other under the action of pressure and vibration. The oxide film is destroyed and plastically deformed, so that the two pure metal faces are in close contact, reaching the atomic distance and finally forming a firm mechanical connection. After the bonding (that is, after the circuit is connected to the pin), the chip is packaged with black glue.

                                        Specifications: 

                                                        Material: FR4

                                                        Layer: 8L

                                                        Copper thickness: 1OZ

                                                        Board thickness: 1.6mm

                                                        Surface Finishing: ENIG

                                                        Solder mask color: Green

                                                        Silkscreen color: White   

                                                        Describe: 

____________________________________________________________________________________

Printed circuit boards abbreviation as PCB. A conductive pattern which is formed on a dielectric material in a predetermined design to form a printed circuit, a printed component, or a combination of the two is generally referred to as a printed circuit. And a conductive pattern that provides electrical connection between components on an insulating substrate, called printed circuits.

PCB characteristics
● High density. For decades, the high density of printed boards has grown with the increased integration of integrated circuits and advances in mounting technology.
● High reliability. Through a series of inspections, tests and aging tests, the PCB can be reliably operated for a long period of time (usually 20 years).
● Designability. For the various performances of PCB (electrical, physical, chemical, mechanical, etc.), the design of printed boards can be realized through design standardization and standardization, with short time and high efficiency.
● Productivity. With modern management, it can carry out standardization, scale (quantity), automation and other production to ensure product quality consistency.
● Testability. Established relatively complete test methods, test standards, various test equipment and instruments to detect and identify PCB product qualification and service life.

● Assemblyability. PCB products not only facilitate the standardized assembly of various components, but also can be automated, large-scale mass production. At the same time, the PCB and various component assembly components can be assembled to form larger components and systems up to the complete machine.

● Maintainability. Since PCB products and various component assembly components are produced in a standardized design and scale, these components are also standardized. Therefore, once the system fails, it can be replaced quickly, conveniently and flexibly, and the system can be quickly restored. Of course, you can say more about it. Such as miniaturization and weight reduction of the system, high-speed signal transmission, etc.

____________________________________________________________________________________

                                       ChuangYing Electronics
                      FOUR Advantages Quality with promise
            More than 15 years Team Pursuit of first-class quality

1, About the factory--More than 15 years industry experience: Self-built factory, 15 years of focus on circuit board manufacturing.

☆ Flip Aluminium PCB: The share of Aluminum industry more than 45%, service and quality have won the praise of customers.

☆ Advanced equipment: PVC plating line, CNC V-CUT machine,  Dongtai high speed drilling machine, high speed flying probe testing machine,  microscope, copper foil tensile tester, ion pollution degree detector.

2, Top technical team - fast delivery, professional service

☆ 50 professional and technical people with more than 10 years of PCB experience have rich experience in various industry standards and process quality requirements.

☆ Provide after-sales technical support, quickly respond to bad feedback, solve customer's difficult problems 

3, Certifications - UL, IO9001:2015, ISO14001:2015, IATF16949

☆ All products undergo strict SGS testing and meet ROHS requirements

☆ Implement TQM quality management and 6σ management mode,   continuous improvement, good rate 99%

☆ Quality control seniors are skilled in IATF16949, QS9000 requirements,and have their internal auditor qualification certificate

4.Work with well-known companies - trustworthy PCB manufacturers

☆ Over the years, has business contacts with many well-known companies such as BYD, Huawei, Schneider, and Siemens etc., and has maintained long-term supply relationships with these industry benchmarking companies.

☆ The products are exported to Europe, America, Japan, Middle East, Philippines and other overseas markets, and are well received and trusted by customers.